8-Channel ADC Project with ATmega32

Hi friends,
here is a small project of Analog to Digital Converter using ATmega32 which is having on-chip 8-channel ADC.
The circuit also consists of an intelligent 16x2 LCD for displaying the value of the voltage applied at each channel. There is also a push-button to scroll throgh the different channels. The schematic is as shown in the figure:


When powered on, the LCD displays"ADC Testing.." on the first line and the value of the voltage applied at the channel0 on the second line. When the push-button is pressed, the second line displays the value of channel1. Like-wise, all the channels can be checked one-by-one by pressing the push-button. The channel count will roll back to channel0 after going to channel7.

The displays shown in the pictures on top show values at channel0 and channel1. Here a AA battery was connected to channel0 and the channel1 was connected with the +5v supply.
A 9-pin connector is used for ADC, 8 ADC channel pins and 1 ground pin. (the values displayed on LCD will fluctuate for a channel if nothing is connected to that channel)

The software is created in C using ImageCraft ICCAVR compiler.
The Schematic and code for this project can be downloaded here:

Download Schematic and Code
Download HEX file

Thanks!!
-----------
ccd@dharmanitech.com

Using M32_Card for Data Acquisition with on-board 8 channnel ADC

Hi friends,
I'm showing here one more application of the home-made M32_Card discussed in my earlier post. The microcontroller of the card is having 8-channel, 10 bit resolution ADC which can be used for analog data acquisition. Using the hyper terminal for the selection of menu, ADC can be selected to display value of the analog voltage applied to each channel (at the 9-pin header pin; 8 ADC channels & 1 GND).
The microcontroller reads the voltage at each channel and sends the data to PC via RS232 cable. At reciving end (PC), the incoming data can be converted into excel format to store the values at regular time intervals.
As shown in the screen-shot of the hyper terminal, I had connected here the 5v Vcc to Channel 0 and an Li cell to channel 7.
The M32 can also send a time impression along with the channel data using the on-board RTC DS1307 to record the voltage variation with time.

The project source code files can be downloaded from here:
Download Source Code

--------
ccd@dharmanitech.com