NOKIA 3310 LCD interfacing with ATmega8

Hi friends,

using graphic LCD in a project gives itreally a good look and flexibility of displaying different characters and shapes. But, the graphic LCDs are quite costly.

The NOKIA 3310 LCD provides a really low-cost solution to add a small graphic display into your project and also good for learning purpose. The LCD is SPI bus compatible, saving many pins for other uses. It operates at 3.3v.

Here is a small circuit for interfacing the 3310 LCD with AVR microcontroller ATmega8. The schematic includes LCD connection with SPI port of ATmega8 with other connections required by LCD. The 3.3v is generated using adjustable voltage regulator LM317 (I was not having any 3.3v regulator at the moment). An LED is also connected with microcontroller just for making sure that the controller is working, particularly when you don't see anything on the display!

Here is the schematic and the pin details of the LCD:

The connector of LCD is 'touch' type. So, I made a small connecor PCB with tracks touching to the pins of LCD. The pcb was pasted at backside of LCD using cello tapes as shown in the back-view image
.

Here is a testing with Proteus ISIS Simulation:


The program routines are written in C with ICCAVR compiler. I've created a library for this display. The low-cost, easy availability has made me relly like this display.
I'm going to use it for

doing other stuffs, too!

Download
----------------
3310 Library (ICCAVR)
3310 Library (AVR-GCC, winAVR, AVRStudio)
3310 project (CodeVision AVR)
Proteus Simulation Model (Simulation was done with CodeVision AVR Hex file)


Check out my thermometer project with this display:
Thermometer with Nokia3310

Download datasheets:
1. ATmega8
2. PCD8544 - nokia 3310 display controller

Thanks!!
--------
ccd@dharmanitech.com